About This 1200°C Dental Ceramic Sintering Furnace 330 x 490 x 380 MM Chamber
This is a high-temperature version of the dental ceramic furnace, designed to sinter high-strength, all-ceramic materials like zirconia or lithium disilicate to full density. Operating up to 1200°C or higher, it applies precise thermal cycles. The working principle often includes a preheating chamber and a high-heat sintering chamber, with precise digital control over time and temperature to achieve the necessary crystalline transformation and densification without distortion. Its purpose is to manufacture ultra-strong, tooth-colored restorations that can withstand masticatory forces. It represents the cutting edge in cosmetic and restorative dentistry technology.
This configuration is suitable when the sample load must fit a 330 x 490 x 380 MM chamber with usable chamber volume of 61.4 litre, approximate power load of 15.3 kW, rectangular - tall chamber profile. It is commonly selected for laboratory, QC, metallurgical, ceramic, pharmaceutical and industrial heat-treatment work requiring stable heating and repeatable process conditions. Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
Equivalent chamber references: 330 x 490 x 380 MM, 33 x 49 x 38 CM and 13 x 19 x 15 INCH. Buyers searching for 1200°C Dental Ceramic Sintering Furnace 330 x 490 x 380 MM; Dental Ceramic Sintering Furnace 1200°C 330 x 490 x 380 MM; Dental Ceramic Sintering Furnace 330 x 490 x 380 MM 1200°C; 330 x 490 x 380 MM 1200°C Dental Ceramic Sintering Furnace; 1200 Degree Dental Ceramic Sintering Furnace 330 x 490 x 380 MM; Dental Ceramic Sintering Furnace 1200 Degree 330 x 490 x 380 MM can verify the same physical chamber on this canonical product page before requesting price, GST invoice, packaging and delivery.
Trutherm manufactures 1200 Degree Celsius (°C) Dental Ceramic Sintering Furnace 330 x 490 x 380 MM Chamber for buyers who search by exact machine type, chamber size and 1200°C temperature rating. This page is specific to the MM dimension version, so the chamber size is presented in the unit normally used in the buyer's drawing, tender or purchase request.
Dental, technical-ceramic and powder-metallurgy sintering each specify tight temperature-uniformity tolerances, which is why sintering furnaces are built with finer zone control than a standard box furnace.
Because sintering schedules can run many hours, energy-efficient insulation and accurate soak-time logging directly affect both part quality and running cost.
FAQs for 1200 Degree Celsius (°C) Dental Ceramic Sintering Furnace 330 x 490 x 380 MM Chamber
What is Dental Ceramic Sintering Furnace typically used for?
Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
What is 1200 Degree Celsius (°C) Dental Ceramic Sintering Furnace 330 x 490 x 380 MM Chamber best suited for?
It is best suited for controlled heating jobs where this exact 330 x 490 x 380 MM chamber size must fit the sample, crucible, tray or batch volume.
Can Trutherm supply 1200 Degree Celsius (°C) Dental Ceramic Sintering Furnace 330 x 490 x 380 MM Chamber with custom controls?
Yes. Controller type, safety devices, body material, power connection and documentation can be configured according to application and site requirements.
Is this chamber size available in CM and INCH also?
Yes. The same chamber is listed as 330 x 490 x 380 MM, 33 x 49 x 38 CM and 13 x 19 x 15 INCH so searches and purchase documents using any common dimension unit match this product.
Application Examples
- Densification of ceramic or metal powder compacts to final hardness.
- Binder burnout followed by high-temperature sintering in a single cycle.
- Dental and technical-ceramic sintering with tight schedule control.
- Powder-metallurgy part consolidation for production trials.
Industry Use-Cases
- Ceramic and dental-lab production sintering.
- Powder-metallurgy manufacturers running qualification batches.
- Advanced-materials R&D groups developing sintering schedules.
- QC labs verifying density and shrinkage after firing.
Recommended Accessories
Sintering setter plates and posts
Multi-segment programmable controller
Alumina sagger
Shrinkage/soak logging module
