About This 1400°C Dental Ceramic Sintering Furnace 175 x 175 x 350 MM Chamber
This is a high-temperature version of the dental ceramic furnace, designed to sinter high-strength, all-ceramic materials like zirconia or lithium disilicate to full density. Operating up to 1200°C or higher, it applies precise thermal cycles. The working principle often includes a preheating chamber and a high-heat sintering chamber, with precise digital control over time and temperature to achieve the necessary crystalline transformation and densification without distortion. Its purpose is to manufacture ultra-strong, tooth-colored restorations that can withstand masticatory forces. It represents the cutting edge in cosmetic and restorative dentistry technology.
This configuration is suitable when the sample load must fit a 175 x 175 x 350 MM chamber with usable chamber volume of 10.7 litre, approximate power load of 7.5 kW, square chamber profile. It is commonly selected for laboratory, QC, metallurgical, ceramic, pharmaceutical and industrial heat-treatment work requiring stable heating and repeatable process conditions. Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
Equivalent chamber references: 175 x 175 x 350 MM, 18 x 18 x 35 CM and 7 x 7 x 14 INCH. Buyers searching for 1400 Degree Celsius Dental Ceramic Sintering Furnace 175 x 175 x 350 MM chamber; 1400°C Dental Ceramic Sintering Furnace 175 x 175 x 350 MM; 1400 Degree Celsius Dental Ceramic Sintering Furnace 18 x 18 x 35 CM chamber; 1400°C Dental Ceramic Sintering Furnace 18 x 18 x 35 CM; 1400 Degree Celsius Dental Ceramic Sintering Furnace 7 x 7 x 14 INCH chamber; 1400°C Dental Ceramic Sintering Furnace 7 x 7 x 14 INCH can verify the same physical chamber on this canonical product page before requesting price, GST invoice, packaging and delivery.
Trutherm manufactures 1400 Degree Celsius (°C) Dental Ceramic Sintering Furnace 175 x 175 x 350 MM Chamber for buyers who search by exact machine type, chamber size and 1400°C temperature rating. This page is specific to the MM dimension version, so the chamber size is presented in the unit normally used in the buyer's drawing, tender or purchase request.
Shrinkage during sintering is predictable but process-dependent, so setter plates and posts are used to support the part and prevent it sticking to the chamber floor as it densifies.
Dental, technical-ceramic and powder-metallurgy sintering each specify tight temperature-uniformity tolerances, which is why sintering furnaces are built with finer zone control than a standard box furnace.
FAQs for 1400 Degree Celsius (°C) Dental Ceramic Sintering Furnace 175 x 175 x 350 MM Chamber
What is Dental Ceramic Sintering Furnace typically used for?
Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
What is 1400 Degree Celsius (°C) Dental Ceramic Sintering Furnace 175 x 175 x 350 MM Chamber best suited for?
It is best suited for controlled heating jobs where this exact 175 x 175 x 350 MM chamber size must fit the sample, crucible, tray or batch volume.
Can Trutherm supply 1400 Degree Celsius (°C) Dental Ceramic Sintering Furnace 175 x 175 x 350 MM Chamber with custom controls?
Yes. Controller type, safety devices, body material, power connection and documentation can be configured according to application and site requirements.
Is this chamber size available in CM and INCH also?
Yes. The same chamber is listed as 175 x 175 x 350 MM, 18 x 18 x 35 CM and 7 x 7 x 14 INCH so searches and purchase documents using any common dimension unit match this product.
How is pricing decided for 1400 Degree Celsius (°C) Dental Ceramic Sintering Furnace 175 x 175 x 350 MM Chamber?
Price depends on chamber size, temperature rating, insulation, heating element, controller, electrical load, packaging, GST and delivery requirements.
Application Examples
- Densification of ceramic or metal powder compacts to final hardness.
- Binder burnout followed by high-temperature sintering in a single cycle.
- Dental and technical-ceramic sintering with tight schedule control.
- Powder-metallurgy part consolidation for production trials.
Industry Use-Cases
- Ceramic and dental-lab production sintering.
- Powder-metallurgy manufacturers running qualification batches.
- Advanced-materials R&D groups developing sintering schedules.
- QC labs verifying density and shrinkage after firing.
Recommended Accessories
Sintering setter plates and posts
Multi-segment programmable controller
Alumina sagger
Shrinkage/soak logging module
Why Choose This Dental Ceramic Sintering Furnace
This sintering furnace is tuned for the slow, multi-segment ramp/soak profiles densification needs, giving finer schedule control than a general box furnace where a simple on/off or single-ramp cycle is normally enough.
