About This 1400°C Powder Sintering Furnace 225 x 225 x 450 MM Chamber
This furnace is used to sinter compressed powder compacts of metal, ceramic, or cemented carbide into solid, dense components. Operating at high temperatures (e.g., 1200°C), it applies heat to cause atomic diffusion across particle boundaries. The working principle often requires controlled atmospheres (hydrogen, nitrogen, vacuum) to reduce surface oxides and promote bonding. Its purpose is in Powder Metallurgy (PM) manufacturing, producing complex net-shape parts like gears, bearings, and filters with high material utilization and excellent properties for automotive, aerospace, and industrial applications.
Trutherm manufactures 1400 Degree Celsius (°C) Powder Sintering Furnace 225 x 225 x 450 MM Chamber for buyers who search by exact machine type, chamber size and 1400°C temperature rating. This page is specific to the MM dimension version, so the chamber size is presented in the unit normally used in the buyer's drawing, tender or purchase request.
This configuration is suitable when the sample load must fit a 225 x 225 x 450 MM chamber with usable chamber volume of 22.8 litre, approximate power load of 10.2 kW, square chamber profile. It is commonly selected for laboratory, QC, metallurgical, ceramic, pharmaceutical and industrial heat-treatment work requiring stable heating and repeatable process conditions. Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
Equivalent chamber references: 225 x 225 x 450 MM, 23 x 23 x 45 CM and 9 x 9 x 18 INCH. Buyers searching for 1400 Degree Celsius Powder Sintering Furnace 225 x 225 x 450 MM chamber; 1400°C Powder Sintering Furnace 225 x 225 x 450 MM; 1400 Degree Celsius Powder Sintering Furnace 23 x 23 x 45 CM chamber; 1400°C Powder Sintering Furnace 23 x 23 x 45 CM; 1400 Degree Celsius Powder Sintering Furnace 9 x 9 x 18 INCH chamber; 1400°C Powder Sintering Furnace 9 x 9 x 18 INCH can verify the same physical chamber on this canonical product page before requesting price, GST invoice, packaging and delivery.
Shrinkage during sintering is predictable but process-dependent, so setter plates and posts are used to support the part and prevent it sticking to the chamber floor as it densifies.
Dental, technical-ceramic and powder-metallurgy sintering each specify tight temperature-uniformity tolerances, which is why sintering furnaces are built with finer zone control than a standard box furnace.
FAQs for 1400 Degree Celsius (°C) Powder Sintering Furnace 225 x 225 x 450 MM Chamber
How is pricing decided for 1400 Degree Celsius (°C) Powder Sintering Furnace 225 x 225 x 450 MM Chamber?
Price depends on chamber size, temperature rating, insulation, heating element, controller, electrical load, packaging, GST and delivery requirements.
What is Powder Sintering Furnace typically used for?
Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
What is 1400 Degree Celsius (°C) Powder Sintering Furnace 225 x 225 x 450 MM Chamber best suited for?
It is best suited for controlled heating jobs where this exact 225 x 225 x 450 MM chamber size must fit the sample, crucible, tray or batch volume.
Can Trutherm supply 1400 Degree Celsius (°C) Powder Sintering Furnace 225 x 225 x 450 MM Chamber with custom controls?
Yes. Controller type, safety devices, body material, power connection and documentation can be configured according to application and site requirements.
Is this chamber size available in CM and INCH also?
Yes. The same chamber is listed as 225 x 225 x 450 MM, 23 x 23 x 45 CM and 9 x 9 x 18 INCH so searches and purchase documents using any common dimension unit match this product.
Application Examples
- Densification of ceramic or metal powder compacts to final hardness.
- Binder burnout followed by high-temperature sintering in a single cycle.
- Dental and technical-ceramic sintering with tight schedule control.
- Powder-metallurgy part consolidation for production trials.
Industry Use-Cases
- Ceramic and dental-lab production sintering.
- Powder-metallurgy manufacturers running qualification batches.
- Advanced-materials R&D groups developing sintering schedules.
- QC labs verifying density and shrinkage after firing.
Recommended Accessories
Sintering setter plates and posts
Multi-segment programmable controller
Alumina sagger
Shrinkage/soak logging module
Why Choose This Powder Sintering Furnace
This sintering furnace is tuned for the slow, multi-segment ramp/soak profiles densification needs, giving finer schedule control than a general box furnace where a simple on/off or single-ramp cycle is normally enough.
