About This 1400°C Sintering Furnace 330 x 330 x 650 MM Chamber
This is the full term for a furnace that performs sintering: the process of bonding powder particles into a solid mass by atomic diffusion at high temperature, below the material's melting point. Operating at temperatures such as 1200°C, it is a critical step in powder metallurgy and ceramics. The working principle involves carefully controlled heating cycles to first remove binders (debinding) and then densify the powder compact. Its purpose is to produce components with controlled porosity, precise dimensions, and tailored microstructures for use in everything from automotive engines to medical implants.
Trutherm manufactures 1400 Degree Celsius (1400°C) Sintering Furnace 330 x 330 x 650 MM Chamber for buyers who search by exact machine type, chamber size and 1400°C temperature rating. This page is specific to the MM dimension version, so the chamber size is presented in the unit normally used in the buyer's drawing, tender or purchase request.
This configuration is suitable when the sample load must fit a 330 x 330 x 650 MM chamber with usable chamber volume of 70.8 litre, approximate power load of 16.2 kW, square chamber profile. It is commonly selected for laboratory, QC, metallurgical, ceramic, pharmaceutical and industrial heat-treatment work requiring stable heating and repeatable process conditions. Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
Equivalent chamber references: 330 x 330 x 650 MM, 33 x 33 x 65 CM and 13 x 13 x 26 INCH. Buyers searching for 1400 Degree Celsius Sintering Furnace 330 x 330 x 650 MM chamber; 1400°C Sintering Furnace 330 x 330 x 650 MM; 1400 Degree Celsius Sintering Furnace 33 x 33 x 65 CM chamber; 1400°C Sintering Furnace 33 x 33 x 65 CM; 1400 Degree Celsius Sintering Furnace 13 x 13 x 26 INCH chamber; 1400°C Sintering Furnace 13 x 13 x 26 INCH can verify the same physical chamber on this canonical product page before requesting price, GST invoice, packaging and delivery.
Binder burnout and sintering are often combined into one cycle, so the furnace must hold a low-temperature soak to remove organics before ramping to the final sintering temperature.
Shrinkage during sintering is predictable but process-dependent, so setter plates and posts are used to support the part and prevent it sticking to the chamber floor as it densifies.
FAQs for 1400 Degree Celsius (1400°C) Sintering Furnace 330 x 330 x 650 MM Chamber
How is pricing decided for 1400 Degree Celsius (1400°C) Sintering Furnace 330 x 330 x 650 MM Chamber?
Price depends on chamber size, temperature rating, insulation, heating element, controller, electrical load, packaging, GST and delivery requirements.
What is Sintering Furnace typically used for?
Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
What is 1400 Degree Celsius (1400°C) Sintering Furnace 330 x 330 x 650 MM Chamber best suited for?
It is best suited for controlled heating jobs where this exact 330 x 330 x 650 MM chamber size must fit the sample, crucible, tray or batch volume.
Can Trutherm supply 1400 Degree Celsius (1400°C) Sintering Furnace 330 x 330 x 650 MM Chamber with custom controls?
Yes. Controller type, safety devices, body material, power connection and documentation can be configured according to application and site requirements.
Is this chamber size available in CM and INCH also?
Yes. The same chamber is listed as 330 x 330 x 650 MM, 33 x 33 x 65 CM and 13 x 13 x 26 INCH so searches and purchase documents using any common dimension unit match this product.
Application Examples
- Densification of ceramic or metal powder compacts to final hardness.
- Binder burnout followed by high-temperature sintering in a single cycle.
- Dental and technical-ceramic sintering with tight schedule control.
- Powder-metallurgy part consolidation for production trials.
Industry Use-Cases
- Ceramic and dental-lab production sintering.
- Powder-metallurgy manufacturers running qualification batches.
- Advanced-materials R&D groups developing sintering schedules.
- QC labs verifying density and shrinkage after firing.
Recommended Accessories
Sintering setter plates and posts
Multi-segment programmable controller
Alumina sagger
Shrinkage/soak logging module
Why Choose This Sintering Furnace
This sintering furnace is tuned for the slow, multi-segment ramp/soak profiles densification needs, giving finer schedule control than a general box furnace where a simple on/off or single-ramp cycle is normally enough.
