About This 1200°C Ceramic Sintering Furnace 250 x 250 x 375 MM Chamber
This furnace densifies ceramic powder compacts into solid bodies through sintering—applying heat below the material's melting point to cause particle bonding. Operating at very high temperatures (e.g., 1200°C), it facilitates atomic diffusion. The working principle often includes controlled atmospheres to prevent oxidation or to aid in the removal of sintering aids. Its purpose is to manufacture high-strength, net-shape ceramic components like cutting tools, bearings, seals, and electronic substrates with precise microstructures. It is critical in the field of advanced structural and functional ceramics.
This configuration is suitable when the sample load must fit a 250 x 250 x 375 MM chamber with usable chamber volume of 23.4 litre, approximate power load of 10.3 kW, square chamber profile. It is commonly selected for laboratory, QC, metallurgical, ceramic, pharmaceutical and industrial heat-treatment work requiring stable heating and repeatable process conditions. Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
Equivalent chamber references: 250 x 250 x 375 MM, 25 x 25 x 38 CM and 10 x 10 x 15 INCH. Buyers searching for 1200 Degree Celsius Ceramic Sintering Furnace 250 x 250 x 375 MM chamber; 1200°C Ceramic Sintering Furnace 250 x 250 x 375 MM; 1200 Degree Celsius Ceramic Sintering Furnace 25 x 25 x 38 CM chamber; 1200°C Ceramic Sintering Furnace 25 x 25 x 38 CM; 1200 Degree Celsius Ceramic Sintering Furnace 10 x 10 x 15 INCH chamber; 1200°C Ceramic Sintering Furnace 10 x 10 x 15 INCH can verify the same physical chamber on this canonical product page before requesting price, GST invoice, packaging and delivery.
Trutherm manufactures 1200 Degree Celsius (1200°C) Ceramic Sintering Furnace 250 x 250 x 375 MM Chamber for buyers who search by exact machine type, chamber size and 1200°C temperature rating. This page is specific to the MM dimension version, so the chamber size is presented in the unit normally used in the buyer's drawing, tender or purchase request.
Shrinkage during sintering is predictable but process-dependent, so setter plates and posts are used to support the part and prevent it sticking to the chamber floor as it densifies.
Dental, technical-ceramic and powder-metallurgy sintering each specify tight temperature-uniformity tolerances, which is why sintering furnaces are built with finer zone control than a standard box furnace.
FAQs for 1200 Degree Celsius (1200°C) Ceramic Sintering Furnace 250 x 250 x 375 MM Chamber
What is Ceramic Sintering Furnace typically used for?
Typical use includes powder metallurgy sintering, ceramic densification and ceramic firing cycles.
What is 1200 Degree Celsius (1200°C) Ceramic Sintering Furnace 250 x 250 x 375 MM Chamber best suited for?
It is best suited for controlled heating jobs where this exact 250 x 250 x 375 MM chamber size must fit the sample, crucible, tray or batch volume.
Can Trutherm supply 1200 Degree Celsius (1200°C) Ceramic Sintering Furnace 250 x 250 x 375 MM Chamber with custom controls?
Yes. Controller type, safety devices, body material, power connection and documentation can be configured according to application and site requirements.
Is this chamber size available in CM and INCH also?
Yes. The same chamber is listed as 250 x 250 x 375 MM, 25 x 25 x 38 CM and 10 x 10 x 15 INCH so searches and purchase documents using any common dimension unit match this product.
How is pricing decided for 1200 Degree Celsius (1200°C) Ceramic Sintering Furnace 250 x 250 x 375 MM Chamber?
Price depends on chamber size, temperature rating, insulation, heating element, controller, electrical load, packaging, GST and delivery requirements.
Application Examples
- Densification of ceramic or metal powder compacts to final hardness.
- Binder burnout followed by high-temperature sintering in a single cycle.
- Dental and technical-ceramic sintering with tight schedule control.
- Powder-metallurgy part consolidation for production trials.
Industry Use-Cases
- Ceramic and dental-lab production sintering.
- Powder-metallurgy manufacturers running qualification batches.
- Advanced-materials R&D groups developing sintering schedules.
- QC labs verifying density and shrinkage after firing.
Recommended Accessories
Sintering setter plates and posts
Multi-segment programmable controller
Alumina sagger
Shrinkage/soak logging module
Why Choose This Ceramic Sintering Furnace
This sintering furnace is tuned for the slow, multi-segment ramp/soak profiles densification needs, giving finer schedule control than a general box furnace where a simple on/off or single-ramp cycle is normally enough.
